Wood Log Carbonization Stove Bamboo Charcoal Carbonizer Furnace

charcoal making machine/wood carbonizer stove
1. Three layers structure of the furnace body. The inner layer is high heat transfer and wear-resistance steel for increasing the carbonizing temperature. The middle layer is the asbestos for insulation. The outer layer is painted steel.
2. Various heating methods. The heating source can be firewood, coal, natural gas, liquefied gas, burner, electric, etc.

Bamboo charcoal carbonization furnace

The new environmentally friendly horizontal airflow carbonization furnace adds a flue gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can be dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and Dryer use.

The operation is very convenient, good safety, high production efficiency, can save a lot of energy, good environmental protection performance. Shunt can also dry burning boiler flue gas and so on.

Hardwood Carbonizing Machine Coconut Shell Charcoal Production Line
horizontal biomass dry distillation carbonization furnace consists of inner tank, insulation, furnace door, rail car , combustible gas reburning pipe, dehumidifying buffer tank, burner, exhaust pipe, and thermometer. The gasifier and flue gas purification device are the optional machine. This furnace using anaerobic dry distillation principle to remove volatile substances in biomass material, to carbonize the biomass material, carbonization process: Feeding raw material and sealing the furnace→Preheating and drying the raw material → Anaerobic carbonization →Cooling and discharging the carbon, total four steps.

Wood logs charcoal briquette press machine
Carbonization furnace for biomass charcoal can greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.

The carbonization stove is a new designed machine for chargin the wood briquette, bamboo, wood log, coconut shell and so on into charcoal. It is selling well for its easy operating, high capacity, good quality. Once carbonization need 8 hours, smokeless and the raw materials can be wood log or other flammable goods.

biomass sawdust carbonization furnace charcoal making machine
This wood carbonization stove is an efficient stove can change wood log, wood briquette, coconut shell and bamboo Palm shells etc directly into final charcoal,can working without electricity.

wood lump charcoal carbonization furnace

Charcoal briquettes for Home heating
Airflow coking furnace was developed by our factory latest modular air coking furnace, more than a day can be carbonized furnace, greatly shorten the production cycle, improve the efficiency of charcoal production, is an ideal equipment of large and medium scale charcoal production of charcoal

Coconut shell charcoal carbonization kiln
It adopts the advanced carbonized technology heat flow,carbonized rate increased significantly

high quality smokeless biomass carbonization furnace wood charcoal making machine

Wood branches briquette making machine plant
The material size must be less 20mm.If material too big,we will recommend you crusher according to your requirement.Besides the moisture of material should be 10-20%.Too wet or too dry will cause bad forming effect.

Biochar making machine is the use of horizontal manufacturing process, biochar making machinee has a three-layer structure, and the middle of light insulation materials. It is possible to keep the temperature in the furnace at all times.

charcoal carbonization furnace charcoal making machine
Raw material of carbonization furnace
lignin-containing material: Wood, Bamboo, Coffee husk, Rice straw, Coconut shell, Rice husk, Palm shell, Nuts shell ect.

High Temperature Continuous Wood Carbonization Furnace.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

biochar kiln carbonization stove to make coconut shell wood log charcoal
Apply for many kinds of biomass raw materials, such as wood, wood log, tree branch, wood stick, wood waste, wood briquette, coconut shell, bamboo, olive husk, palm kernel shell, cashew nut shell, etc.

1. Due to its design principle with two layers, one is the cooling layer, another is the heat preservation layer, so can reduce its carbonization time.
2. It can use different material as heating source. Such as the Firewood/coal gas/ natural gas/liquefied gas/Combustible gas(produced during the carbonized process).
3. Using anaerobic coking and combustible gas recycling technology.
4. Every step from raw materials to production process will be monitored by the engineer, equipment debugging the final before delivery. With engineer and boss signature before shipment ensure the reliability of the technology, has the practicability of products.
5. Smoke purification treatment : Water and activated carbon filtration purification gas.

Horizontal charcoal carbonization furnace adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.

Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.

Introduction of Horizontal oven kiln briquette wood charcoal carbonization stove furnace:
Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the carbonizing furnace can be the material of activated carbon. thus it is very famous among many industries like charcoal making industry and boiler industry

How to make charcoal from coconut shell
Briquette are made by grinding biomass and sawdust into a homogenous pulp and forming this into a briquette under very high pressure.High pressure & pressing releases one of the natural components of wood-lignin which has the property of becoming liquid at high pressure(temperature) and,as it subsequently cools,it binds the wood together in its new form briquettes.

High Temperature Wood Carbonization Furnace.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood branches, wood, coconut shells, plants,straw,bamboo etc.).

It adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.

At present, there are three types of carbonization furnaces, common type (can only be used to produce charcoal, not to collect gas); wood carbonization equipment (used to carbonize branches, wood blocks, coconut shell blocks, scrap pieces in furniture factories, etc.) This equipment can be configured The gas recovered by the gasification furnace device can be turned into fuel gas for the carbonization furnace’s own use or other); the new horizontal environmentally friendly carbonization furnace has the effect of one machine and two purposes, and the materials can also be directly carbonized, or can be carbonized after rods.

The smokeless charcoal stove is special used for wood log, jute stick and other long rod-type biomass characteristics, adopts horizontal structure, cart entry and exit raw material and the advanced hot gas dry carbonization process technology, using a unique carbonization flue gas (volatile hydrogen material and tar, etc.)

Additional function: Excess combustible gas can be recycled, recycled wood tar system, Recycling, purification and utilization of water vapor.

wood carbonizer stove
How to make charcoal from sawdust?
1. Wood crusher: A crusher will help you to reduce the size of your raw material to less than 5 mm.
2. Dryer: For small capacity drying, you can choose the air flow dryer with small investment. If your capacity is bigger, a rotary dryer will be a better choice.
3. Wood briquette machine: Press raw material into wood briquettes.
4. Charcoal furnace: After carbonization, wood sawdust briquettes become smokeless charcoal.
5. Other accessories: Conveyor, material distributor, etc.

Palm husk charcoal making machine
♦ square, round, hexagonal, pentagon(with/without edge)
♦ Hollow
♦ Stick shape
♦ Diameter: 50-80mm
♦ Inside diameter: 15-20mm
♦ Length: 20-50cm
♦ Weight of one briquette: 1kg
♦ Specific gravity: 1200—1300kg/m3
♦ Calorific value:4000-4800kcal/kg

New model horizontal bamboo charcoal carbonizer furnace oven can directly carbonize fruit tree,bamboo,branch,wood blocks,coconut shell,palm shell,furniture factory scrap,etc.The new environmentally friendly carbonization furnace adds gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can reach dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and baking and used for dry machine and itself.