Small horizontal airflow carboniztaion furnace

Sawdust briquette charcoal machinery
What is capacity of your machine ?
One inner pot can load 2.5tons machine-made briquettes; 8hours will get one ton machine-made charcoal.
One Inner pot can load 2tons natural wood, 8-10hours will get 600kg-800kg natural charcoal.
Therefore, one furnace can get: 3tons machine-made charcoal, 1.8-2.5tons natural wood charcoal.

New model horizontal bamboo charcoal carbonizer furnace oven can directly carbonize fruit tree,bamboo,branch,wood blocks,coconut shell,palm shell,furniture factory scrap,etc.The new environmentally friendly carbonization furnace adds gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can reach dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and baking and used for dry machine and itself.

coconut shell charcoal making machine
This bio-fuel briquette is 40-90mm in diameter,occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.The bio-fuel carbon maintains the cleanliness and hygiene,and is suitable for family heating and barbecuing.

About Bamboo Horizontal Airflow Charcoal Carbonizer Furnace Oven, the raw material is verious: wood, wood branch, sawdust, coconut shell, rice husk, wood jute sticks coconut shell hookah bamboo sawdust, etc. Recycled wood tar, wood vinegar liquid. One ton charcoal can get 50kg of wood tar and wood vinegar liquid. Energy saving and environmental protection.

Charcoal briquettes for Home heating
Airflow coking furnace was developed by our factory latest modular air coking furnace, more than a day can be carbonized furnace, greatly shorten the production cycle, improve the efficiency of charcoal production, is an ideal equipment of large and medium scale charcoal production of charcoal

Coconut Shell Biochar kiln Charcoal Making Machine
horizontal charcoal furnace is a new kind of air flow type carbonization stove, which can also be called charcoal kiln, charcoal making machine, charcoal stove. It is used to make charcoal from wood and all kinds of biomass.

High Temperature Continuous Wood Carbonization Furnace.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

charcoal making machine for nuts biomass briquette carbon fiber wood log sawdust

At present, there are three types of carbonization furnaces, common type (can only be used to produce charcoal, not to collect gas); wood carbonization equipment (used to carbonize branches, wood blocks, coconut shell blocks, scrap pieces in furniture factories, etc.) This equipment can be configured The gas recovered by the gasification furnace device can be turned into fuel gas for the carbonization furnace’s own use or other); the new horizontal environmentally friendly carbonization furnace has the effect of one machine and two purposes, and the materials can also be directly carbonized, or can be carbonized after rods.

Palm husk charcoal making machine
♦ square, round, hexagonal, pentagon(with/without edge)
♦ Hollow
♦ Stick shape
♦ Diameter: 50-80mm
♦ Inside diameter: 15-20mm
♦ Length: 20-50cm
♦ Weight of one briquette: 1kg
♦ Specific gravity: 1200—1300kg/m3
♦ Calorific value:4000-4800kcal/kg

Coffee waste charcoal press machine
Briquetting is a process during which raw materials are compressed under high pressure and high temperature. After the processing of drying and pressing, the briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood.

The charcoal carbonization machine adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.And the operation is very convenient, good safety, high production efficiency, can save a lot of energy, good environmental protection performance. Shunt can also dry burning boiler flue gas and so on. Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.

Wood lump charcoal for BBQ
In addition to their use of the stove, achieve energy conservation and environmental protection requirements

Biochar making machine is the use of horizontal manufacturing process, biochar making machinee has a three-layer structure, and the middle of light insulation materials. It is possible to keep the temperature in the furnace at all times.

Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.

The new environmentally friendly horizontal airflow carbonization furnace adds a flue gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can be dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and Dryer use.

Wood branches briquette making machine plant
The material size must be less 20mm.If material too big,we will recommend you crusher according to your requirement.Besides the moisture of material should be 10-20%.Too wet or too dry will cause bad forming effect.

charcoal carbonization stove furnace charcoal making machine

charcoal making machine/wood carbonizer stove
1. Three layers structure of the furnace body. The inner layer is high heat transfer and wear-resistance steel for increasing the carbonizing temperature. The middle layer is the asbestos for insulation. The outer layer is painted steel.
2. Various heating methods. The heating source can be firewood, coal, natural gas, liquefied gas, burner, electric, etc.

1. Due to its design principle with two layers, one is the cooling layer, another is the heat preservation layer, so can reduce its carbonization time.
2. It can use different material as heating source. Such as the Firewood/coal gas/ natural gas/liquefied gas/Combustible gas(produced during the carbonized process).
3. Using anaerobic coking and combustible gas recycling technology.
4. Every step from raw materials to production process will be monitored by the engineer, equipment debugging the final before delivery. With engineer and boss signature before shipment ensure the reliability of the technology, has the practicability of products.
5. Smoke purification treatment : Water and activated carbon filtration purification gas.

Horizontal charcoal carbonization furnace adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.

Bamboo charcoal carbonization furnace

high quality smokeless biomass carbonization furnace wood charcoal making machine

coconut shell huck makig charcoal for shisha
Briquette machine screw propeller push the material into forming tube.

best selling wood sawdust briquette machine
Voltage 380v,450v
Capacity 260-350kg/h
Motor power 18.5kw
Speed 40rpm
Raw material Peanut shells, bagasse,rice husk,sawdust,
Usage press the powder into briquettes
Moisture of raw material 8%-12%
Working type Screw Pushing
Package Wooden case

biomass sawdust carbonization furnace charcoal making machine
This wood carbonization stove is an efficient stove can change wood log, wood briquette, coconut shell and bamboo Palm shells etc directly into final charcoal,can working without electricity.

Hot sell Bbq charcoal briquettes biomass wood charcoal machine
You could also used sawdust briquette machine and charcoal making machine to produce charcoal briquette.

The operation is very convenient, good safety, high production efficiency, can save a lot of energy, good environmental protection performance. Shunt can also dry burning boiler flue gas and so on.

Wood Charcoal Carbonization Furnace is a new type charcoal machine, it could deal with raw materials such as wood waste, wood branch, bamboo, sawdust briquette, palm shell, coconut shell, peanut shell, olive wastes and etc. It has big diameter, large capacity, simple operation and wide applications for charcoal raw materials. Before the carbonization, the raw material can be shaped briquettes or shapeless material such as wood logs, wood strips etc. You can also put lump materials into carbonization furnace directly, and get natural biomass charcoal after 6-8hours.

Horizontal Carbonizing Furnace to end charcoal cooling time is shorter.
Horizontal Carbonizing Furnace Supporting a track and kiln car, use more convenient,reduce worker labor intensity.