PACKING AND DELIVERY

Dry Cleaner Alfalfa Hay Animal Feed Dryer
1) Charcoal briquette drying machine can have various layers. Normally, three or five layers are most popular.
2) Each conveyor mesh belt layer has an adjustable-speed motor. In this way, conveyor mesh belt conveyor can be moved evenly.

charcoal briquette tunnel dryer
Drying raw material ( such as coal briquettes, charcoal briquettes, ore briquettes, herb, etc.)was distributed onto the mesh belt conveyor evenly, and through the moving in the mesh belt dryer, hot air will absorb inner and outer water content from drying raw material. By the way, we can adjust final raw material’s water content by adjusting mesh belt dryer’s moving speed. Normally, drying raw material can move in the mesh belt dryer for 3 hours according to your requirements.

mobile crusher Making Sawdust shaving machine
The wood crusher is used to crush wood log, branches, or wooden crops waste such as straw, palm leaves, corncob, and other branches. The output sawdust size can be controlled by the sieve inside. The final outputs can be used for making pellets, organic fertilizer, feed, mushroom substrate or charcoal rod.

wood chipper grinder hammer mill
The wood crusher, also known as the wood sawdust machine, integrates slicing and crushing. It can cut branches and logs with a chip diameter of 1 to 45 cm. It can also be used to crush fibrous stalk-like materials such as bamboo, thatch, corn stalks, and sorghum stalks. This machine has a wide range of uses, low price, and very stable quality, so it sells very well in the foreign trade market.

wood crusher machine mobile crusher

wood sawdust making chipper machine
Sawdust making machine can be used to crush wood logs, wood branch, wood chips etc. into wood sawdust for paper making, edible mushroom, BBQ charcoal, shaving board and sawdust board processing and other industrial production.

Wood Log Chipper Crusher
Applicable materials: branches, logs, Chinese fir, poplar, fruit wood, bamboo, pine,
miscellaneous wood, etc
Scope of application: fermentation bed for edible fungus planting and breeding, charcoal
production and particle production

Wood Crusher Biomass Wood Sawdust Machine
Wood crusher machine is widely used in the material preparation section of industrial production such as papermaking, edible fungi, machine-made charcoal, particleboard, sawdust board, high-density board and MDF and a single wood powder (sawdust) production base. The cutting raw materials are mainly logs and branches

woodwork board crusher shredder
The pulley is driven by the motor to make the rotor of the pulverizer run at a high speed. At the same time, the rotor generates a high-speed airflow that rotates in the direction of the blade. The material is accelerated in the airflow and subjected to repeated impact, cutting and friction, and then enters the analyzer with the airflow for analysis. When the centrifugal force is greater than the centripetal force, the fine particles enter the powder collector with the air flow for collection, and the coarse particles enter the centrifugal re-pulverizing chamber and continue to pulverize until the fineness you are satisfied with is reached.

Palm branches Diesel chipper shredder Machine
The wood crusher machine is finely made and has high processing technology. It adopts a double-layer body and has low noise in production and use.

wood sawdust crusher
The wood crusher making machine is equipped with a fineness analyzer, which is a new type of milling equipment dedicated to the crushing of light materials, fibrous materials, brittle materials, tough materials and other special and difficult materials.

biomass sawdust carbonization furnace charcoal making machine
This wood carbonization stove is an efficient stove can change wood log, wood briquette, coconut shell and bamboo Palm shells etc directly into final charcoal,can working without electricity.

wood bamboo charcoal making machine
Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the carbonizing furnace can be the material of activated carbon. thus it is very famous among many industries like charcoal making industry and boiler industry!

wood carbonizer stove
How to make charcoal from sawdust?
1. Wood crusher: A crusher will help you to reduce the size of your raw material to less than 5 mm.
2. Dryer: For small capacity drying, you can choose the air flow dryer with small investment. If your capacity is bigger, a rotary dryer will be a better choice.
3. Wood briquette machine: Press raw material into wood briquettes.
4. Charcoal furnace: After carbonization, wood sawdust briquettes become smokeless charcoal.
5. Other accessories: Conveyor, material distributor, etc.

charcoal making machine/wood carbonizer stove
1. Three layers structure of the furnace body. The inner layer is high heat transfer and wear-resistance steel for increasing the carbonizing temperature. The middle layer is the asbestos for insulation. The outer layer is painted steel.
2. Various heating methods. The heating source can be firewood, coal, natural gas, liquefied gas, burner, electric, etc.

coconut shell carbonization furnace
Easy to operate, safety, environmental protection and high production efficiency. It is the main ideal equipment of the charcoal production line.

Smokeless bbq charcoal making machine
1. Due to its design principle with two layers, one is the cooling layer, another is the heat preservation layer, so can reduce its carbonization time.
2. It can use different material as heating source. Such as the Firewood/coal gas/ natural gas/liquefied gas/Combustible gas(produced during the carbonized process).

Bamboo coconut lump charcoal making machine
The reason is called biochar making machine because the stick in the carbonization process will produce a lot of light yellow combustible gas. These gases through the carbonization furnace with there own pipes can make combustible gas diversion to the charring furnace combustion zone to the second fire heating. More environmentally friendly and saving fuel.

Charcoal stove coal carbonization furnace biochar making machine
Biochar making machine is the use of horizontal manufacturing process, biochar making machinee has a three-layer structure, and the middle of light insulation materials. It is possible to keep the temperature in the furnace at all times.

sawdust biomass carbonization furnace
In today’s world, many people like to eat barbecue. However, barbecue carbon is definitely used when eating barbecue. Our biocharcoal making machine is used to make smokeless barbecue carbon.

Hardwood Carbonizing Machine Coconut Shell Charcoal Production Line
horizontal biomass dry distillation carbonization furnace consists of inner tank, insulation, furnace door, rail car , combustible gas reburning pipe, dehumidifying buffer tank, burner, exhaust pipe, and thermometer. The gasifier and flue gas purification device are the optional machine. This furnace using anaerobic dry distillation principle to remove volatile substances in biomass material, to carbonize the biomass material, carbonization process: Feeding raw material and sealing the furnace→Preheating and drying the raw material → Anaerobic carbonization →Cooling and discharging the carbon, total four steps.

Bamboo Fresh Wood Log Charcoal Carbonization Furnace
Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the carbonizing furnace can be the material of activated carbon. thus it is very famous among many industries like charcoal making industry and boiler industry!

charcoal carbonization furnace charcoal making machine
Raw material of carbonization furnace
lignin-containing material: Wood, Bamboo, Coffee husk, Rice straw, Coconut shell, Rice husk, Palm shell, Nuts shell ect.

Inner package bamboo wood sawdust charcoal briquette making machine: plastic packing
Outside package of bamboo wood sawdust charcoal briquette making machine: wooden case

hot sale rice husk biomass pellet making machine
The biomass pellet machine adopts the principle of interaction between the extrusion force between the ring die and the pressure wheel and the friction force of the die hole, so that the material can be shaped. There is no need to add additives and binders during the processing of materials. Wood materials have softening characteristics. When the temperature reaches a certain value, they soften, and the bonding strength is enhanced. Under a certain pressure, the fiber molecular clusters are dislocated, deformed, and stretched. The adjacent biomass particles inside are recombined and pressed into a shape.

cassava pellet mill lead pellet production machine
With small volume, heavy ratio, convenient storage and transportation; High calorific value, combustion resistance, high fuel purity,no sundries that do not generate heat, no sulfur and phosphorus, no corrosion of the boiler, can extend the service life of the boiler; The combustion process will not produce harmful gases to the environment; The ash after burning can be used as organic fertilizer.

Manufacturer pellet mill making machine
The whole production lines for making pellets consists of wood hammer crusher,sawdust dryer,pellet machine, pellet cooler and pellet packing machine.
The finished pellets is generally about 8-12mm in diameter, and the length is generally 4-5 times of the diameter.

wood pellets making biomass wood pellet mill
1. Raw materials diameter requirement : 3-5mm(If large ,crusher machine should be used)
2. Raw materials moisture:15-25%.(If beyond the scope,dryer machine should be used )

straw cow dung fungus stick pellet mill making machine
The ring die compress machine for sawdust is applied to the material with low adhesiveness and low shaping ,such as the rice husk, sunflower seed husk, peanut shell and other fruit shell branch, trunk, bark and other wood waste; a variety of crop straws, rubber, cement ,ash and other chemical materials. The compress machine for sawdust is widely used in the feed plant, wood processing, fuel plant, fertilizer plant and chemical plant etc. It is the ideal pressing shaping equipment with low investment and high profit.

Biomass wood pellet making machine sawdust shavings
efficient centrifugal vertical ring die compress machine for wood sawdust absorbs the quintessence of various pellet machines both at home and abroad, the heart part adopts “double-layer die” as the unique structure. The rollers are made by abrasion-proof alloy steel, this vertical ring die compress machine for sawdust with characteristics of unique design, rational structure, lower power consumption, high efficiency, long lifetime.