Oxygen-free wood carbonization stove oven

How to make coffee husk charcoal machine
Wood Sawdust Briquetting Production Line :
Raw Material → Crusher → Dryer → Briquette machine→Carbonization Furnace.

Additional function: Excess combustible gas can be recycled, recycled wood tar system, Recycling, purification and utilization of water vapor.

Environmental protection .because the stick in the carbonization process will produce a lot of light yellow combustible gas.These gases through the carbonization furnace with there own pipes can make combustible gas diversion to the charring furnace combustion zone to the second fire heating. More environmentally friendly and saving fuel.

biomass sawdust carbonization furnace charcoal making machine
This wood carbonization stove is an efficient stove can change wood log, wood briquette, coconut shell and bamboo Palm shells etc directly into final charcoal,can working without electricity.

Wood logs charcoal briquette press machine
Carbonization furnace for biomass charcoal can greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.

charcoal carbonization stove furnace charcoal making machine

The advantage of the Wood coconut shell charcoal making machine
1. Due to its design principle of horizontal type, reduce its carbonization time.
2. It can use different material as the fuel. Like waste wood, charcoal, natural gas, liquefied gas or coal gas.
3. Saving energy, it can reuse the smoke produced during the process of carbonization.
4. Continuous carbonization, it can produce 2-3 furnaces per day.

Bamboo Charcoal Carbonizer Furnace Oven
New model horizontal bamboo charcoal carbonizer furnace oven can directly carbonize fruit tree,bamboo,branch,wood blocks,coconut shell,palm shell,furniture factory scrap,etc.The new environmentally friendly carbonization furnace adds gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can reach dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and baking and used for dry machine and itself.

best selling wood sawdust briquette machine
Voltage 380v,450v
Capacity 260-350kg/h
Motor power 18.5kw
Speed 40rpm
Raw material Peanut shells, bagasse,rice husk,sawdust,
Usage press the powder into briquettes
Moisture of raw material 8%-12%
Working type Screw Pushing
Package Wooden case

Bamboo carbonization kiln furnace stove for making wood charcoal
The Bamboo carbonization kiln furnace stove for making wood charcoal can be all kinds of the wood,tree branches, bamboo ,biomass briquettes, the coconut shell etc.
The details information:
Effective Volume:8CBM
Dimension(L*W*H):3.5*2.15*2.5m
Power:0
Certification:CE
Warranty:1 Year
After-sales Service Provided:Field installation, commissioning and training

This equipment organically combines the principle of gasification continuous carbonization and drum heating principle to realize a new process of smokeless carbonization. The main raw materials of continuous carbonization furnace are rice husk, straw, bagasse, palm shreds, bark and other plant wastes containing lignin. The carbonization efficiency is high, continuous production is possible, and smoke-free environmental protection is important for environmental protection

Horizontal Carbonizing Furnace to end charcoal cooling time is shorter.
Horizontal Carbonizing Furnace Supporting a track and kiln car, use more convenient,reduce worker labor intensity.

Biochar making machine is the use of horizontal manufacturing process, biochar making machinee has a three-layer structure, and the middle of light insulation materials. It is possible to keep the temperature in the furnace at all times.

Sawdust briquette charcoal machinery
What is capacity of your machine ?
One inner pot can load 2.5tons machine-made briquettes; 8hours will get one ton machine-made charcoal.
One Inner pot can load 2tons natural wood, 8-10hours will get 600kg-800kg natural charcoal.
Therefore, one furnace can get: 3tons machine-made charcoal, 1.8-2.5tons natural wood charcoal.

In today’s world, many people like to eat barbecue. However, barbecue carbon is definitely used when eating barbecue. Our biocharcoal making machine is used to make smokeless barbecue carbon.

coconut shell charcoal making machine
This bio-fuel briquette is 40-90mm in diameter,occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.The bio-fuel carbon maintains the cleanliness and hygiene,and is suitable for family heating and barbecuing.

Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove!

Hot sell Bbq charcoal briquettes biomass wood charcoal machine
You could also used sawdust briquette machine and charcoal making machine to produce charcoal briquette.

charcoal making machine for nuts biomass briquette carbon fiber wood log sawdust

Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.

Bamboo coconut lump charcoal making machine
The reason is called biochar making machine because the stick in the carbonization process will produce a lot of light yellow combustible gas. These gases through the carbonization furnace with there own pipes can make combustible gas diversion to the charring furnace combustion zone to the second fire heating. More environmentally friendly and saving fuel.

Wood lump charcoal for BBQ
In addition to their use of the stove, achieve energy conservation and environmental protection requirements

Building template charcoal making machine
What materials do you use to dry ?
You can use almost all the biomass materials.

The smokeless charcoal stove is special used for wood log, jute stick and other long rod-type biomass characteristics, adopts horizontal structure, cart entry and exit raw material and the advanced hot gas dry carbonization process technology, using a unique carbonization flue gas (volatile hydrogen material and tar, etc.)

How to make Bamboo charcoal
Wood Airflow Continuous Coconut Shell Charcoal Carbonization Stove Furnace Retort Kiln Machine. It can make the raw materials such as manmade wood briquettes,wood log,wood branch,bamboo,coconut shell etc. into charcoal directly.

It adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.

hard wood charcoal carbonized furnace

charcoal making machine/wood carbonizer stove
1. Three layers structure of the furnace body. The inner layer is high heat transfer and wear-resistance steel for increasing the carbonizing temperature. The middle layer is the asbestos for insulation. The outer layer is painted steel.
2. Various heating methods. The heating source can be firewood, coal, natural gas, liquefied gas, burner, electric, etc.

Firewood briquette charcoal machine for BBQ

charcoal carbonization furnace charcoal making machine
Raw material of carbonization furnace
lignin-containing material: Wood, Bamboo, Coffee husk, Rice straw, Coconut shell, Rice husk, Palm shell, Nuts shell ect.