Jute Sticks Charcoal Making Machine

Wholesales Coconut Charcoal Briquette Machine
This coconut charcoal briquette machine can be used to extrude charcoal stick, biomass stick of different diameters (diameter range: 15-65mm) in cylinder or square shape without hole through different moulds from charcoal dust or charcoal powder.

Charcoal Powder Briquetting Machine
Application:

Final briquettes are clean fuel in the home using for warm, cooking, heating material.

Coconut Shell Sawdust Charcoal Briquette Machine

Bbq Charcoal Briquette Extruder

Briquette Extruder Press

Coal stick briquett extruder machine is jone of the coal powder shaping machines, which using the principle of screw extrusion to compress the coal powder into a predetermined shape with a certain intensity. After the coal powder is poured into machine chamber with tremendous pressure. it will be shaped into certain shapes through various molds.

Small capacity charcoal rods forming machine
Any types of charcoal can be used for charcoal bricket making machine to make shisha charcoal, Such as wood charcoal,coconut shell charcoal,bamboo charcoal, also wood,tree branches,coconut shell and etc.We have different production process to deat with the material,then to produce shisha.

Sawdust Coal briquette machine

Factory price straw Cotton stalk briquette press machine
Biomass charcoal briquette machine can compress rice husk,coconut shell,peanut shell, sawdust, straw,grass,and other agricultural waste mechanically into rods,blocks and particles to improve ten times fuel value per unit volume.

Charcoal briquettes machine
The main parts of the machine with a kind of special wear-resistant material can be continuously produce.

Coal bar extruder
The different models for you choose. We can also customize as your request.

charcoal extruding machine coconut shell charcoal powder extruder forming machine
This Coal Briquette Extruder uses the principle of spiral extrusion, compressed the prepared

pulverized coal into a certain intensity of cylinder or plum flower shaped through extruding.

widely used to making coal powder into briquettes for boiler, furnace, home heating, etc.

coal stick making machine
The Coal Briquette Machine is the special equipment for processing the charcoal powder or coal dust into different shape, different size of charcoal briquettes with the different moulds

Briquette Wood Charcoal Making Machine
This charcoal briquette machine mainly is using the rural corn stover, corn cobs, branches, leaves, sawdust as raw material to produce charcoal.
The charcoal machine can process all kinds of straw and branch. The wood charcoal making machine can produce the high efficiency charcoal.

coal stick making machine

charcoal briquette extruder coal stick making machine
charcoal briquette extruder machine

Advantage Of Coal Rod Making Machine
1. It absorbs the advanced technique at home and abroad.
2. Innovative design and reliable quality.
3. Key parts are processed by imported high quality materials.
4. High strength and toughness.
5. Temperature control, durability, adaptability.

Charcoal Screw Press Briquette Machine
This product use screw extrusion principle, will be prepared coal powder compressed into a cylinder of a certain intensity or plum blossom shape（Not only the cylindrical or plum flower shape, our mould can be replaced）,It can make full use of pulverized coal, reduce the fuel cost

Coal dust briquette press machine
The finished model of the charcoal machine can be round, square and other shapes.
The diameter of the finished product produced by the charcoal machine can be between 50-80Sav

Coal powder molding series coal bar machine is the use of the orn side,sawdust, wood shavings, wood, branches, rice husk, peanut shell, bagasse, cotton pole, maize wine, slag pole, south, north crops such as wheat straw, rice straw, straw as raw material, and the rawmaterials should be carbonization first.

charcoal briquette extruder machine
Coal and charcoal rods mechanism is used as the charcoal rods can make full use of pulverized charcoal, don’t need adding lime in the production process, reduce the cost of fuel, and improve the calorific value of charcoal, has high economic benefit, the other equipment is small in size, do not need to be carbonized drying equipment, do not need to steam, save investment, reduce the area.

Charcoal briquette making plant
Working Flow:
*1 Binder mixer: It is using for dissolving and thicking binder.
*2 Crusher and mixer: It is a machine with the function of crushing and mixing together, crushing the raw material below 5mm, and mixing them uniformly. The moisture need controlled between
25%-30%.
*3 Coal briquette machine: It presses coal powder, charcoal powder, or other powders.
*4 Drying room: We have mesh belt dryer and Air energy drying room . We will suggest suitable dryer according to your raw machine, shape and size

Working principle :

coal dust briquette making machine
The raw material that meets the requirements of the rod is placed in the feeding hopper of the equipment, and a high temperature and high pressure zone is formed under the action of the screw propeller and the heating coil, and the loose raw material is processed into a hollow rod body through the forming cylinder through spiral extrusion

Charcoal stick extrusion coal bar briquette machine bbq
Features of charcoal sticks making machine
1：large feed screw lead,feed fast forward helix lead a small,provincial power.
2：shaft seat and the cylinder rigid connections,high concentricity,anti-thrust, the machine stability.
3：part adopts fault structure should be sealed,dirt missed by a fault at.
4：V-belt drive,smooth operation,low noise,while its role overload.
5：connected with the cylinder head ring structure,bolt structure,according to the user needs to elect their own set.

charcoal briquette press machine
The compression process of biomass under the high temperature and high pressure of the carbonization furnace has no pollution to the environment during the combustion process.

straw charcoal briquette machine

Professional Manufacturing sales shisha charcoal machine
.After changing the mold, the material can be pressed into sheet-like (Ф15-Ф50mm) square, rectangular, ring, diamond, triangle, cylindrical and other geometric products. It can also emboss words, trademarks, patterns and various special shapes.

Coal fine powder extruder machine
the shaping mould of the charcoal briquettes machine

biomass charcoal forming making machine
It mainly uses carbonaceous wood materials such as sawdust, sawdust, rice husk, peanut shell and plant straw, and passes through high temperature and high pressure process without any binder, extruded into a solid hollow bar

charcoal making machine
The process for charcoal making machine price as follow:
a. Crush the raw material into small pieces (diameter is about 3-5mm).
b. Dry the material by machine or dried it in the sun, till the moisture is less than 12%.
c. Put the material into feed let of briquette machine.
d. Produce the briquette stick from biomass material without any additive.
e. Carbonized the briquette stick.

CE Coal Pellet Making Extruder
The cow dung briquettes