Heating ring For Biomass Charcoal Briquette Machine Equipment

Rice Hull Charcoal briquette Making Machine
The outlet wood briquettes has the features of high density, small volume, which can take place of fuel wood and coal

diesel engine wood briquette machine
This series of equipment has large output and low energy consumption, which is more than 50% energy-saving than the old spiral forming machine.

This Sawdust Briquette Screw Extruder Machine designed with automatic temperature control system, it can produce high density wood briquette from biomass, tree, bamboo, etc. The extruded briquette can be used as fuel for BBQ, domestic boiler, or industrial boiler.

Olive husk for making briquette machine
Wood charcoal briquette machine can be used in producing high quality wood charcoal stick with sawdust, wood chips, branches, crop stalks, sugarcane residue, coffee husk, paddy straw, sunflower stalk, cotton stalks, bamboo dust, palm husk, soybeans husk, tea waste, etc.

Wood Chip Brick Briquettes Press Machine
This is sawdust briquette making machine.Machine adopt good quality carbon steel,the service life over 10 years.The material can be various biomass,like palm kernel,peanut shell,branch,logs,ect.The material size must less 5mm.If material too big,we will recommend you crusher according to your requirement.Besides the material size must less 5mm,the moisture of material should be 12%.Too wet or too dry will cause bad forming effect.If your material moisture over 12%,we have sawdust drying machine.After crushing,the material was delivery to drying machine,then it was sent to forming machine.

The moisture of residue materials should be below 12%. Our  machine is with dual-purpose. It can be used in two different productions with different processing flow chart

Hot Sale Straw Paper Mill Waste Biomass Briquette Machine
Packing
The normal package is wooden box. We will use pe film for packing or pack it according to customers special request.

small coal biomass wood press briquette machine
Adopt the unique heating method to warm the machine in a short time 10-20 minutes and always keep the working temperature in a higher level.

wooden powder briquetting machine
Type: screw briquetting machine
Abrasive size: 30-60mm
Heating ring: 2kw(3pcs)
Capacity: 200-250kg/h
Briquette dimension: 5cm
Shelf structure: Channel steel 5mm
Iron thickness: 3mm
Raw material: biomass wastes

BBQ use screw extruder biomass charcoal briquetting press machine
Production Capacity: 350-400kg/h
Motor: 15-22kw
Place of Origin: Henan, China
Voltage: 380V, 50HZ,3 Phase
Dimension(L*W*H):1600*1000*1000
Weight: 560kg
Features: Screw Press briquetting press machine
Warranty: 1 Year
Raw material: Straw, Rice husk, coffee husk, olive waste, wood dust, etc.

Screw briquetting machine for sawdust wood straw
Packing: We can install machines in the factory first or send the installation instructions to assist you.

Olive husk made briquettes for cooking
Any types of Agro-forestry waste and forest waste can be used for make briquettes Such as maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo sawdust, bagasse

briquette making machine with raw materials of bamboo, coconut etc
Condition: New
Place of Origin: Henan, China
Brand Name: SANJIN
Voltage: 220/380V
Weight: 800kg
Dimension(L*W*H): 1.7*0.65*1.45m
Warranty: 1 Year
Product name: charcoal extruder machine
Raw material: sawdust
Capacity: 200-500kg/h

sawdust briquette press machine price
1.Size: less than 5mm;
2.Moisture: 6-12%; If the moisture is less than 6%, the briquette will with lower strength as the viscosity and the conversion of raw materials is in low level. Besides, if the moisture is more than 12%, the briquette will be soft and always with crackles, also with a low density.

professional factory sawdust and wood waste bricket machine for BBQ
1. Automatic cutting device: the incision is neat and the length is uniform
2. Drive: motor (three-phase) or diesel engine
3. No adhesive/binder required
4. Adjustable density, up to 1.5g/cm3
5. Any biomass can be used
6. Propeller pitch is 32, 36, 40, 45mm and other units (according to different raw materials)

Diesel Wood chips biomass briquette machine
Biomass wastes, such as sawdust,rice husks,coffee husks,rice straw, wheat straw,etc.
Material required: Moisture 8%-12%,size3-5mm
If moisture>12% may need dryer,We have air flow dryer and drum dryer.
If material size >5mm will need hammer mill or wood crusher.

Charcoal Press Extruder Machine for BBQ
High yield, high efficiency and non-pollution

Charcoal Coal Briquette Extruder Equipment
This machine is suitable for molding of biomass fuels, It is an important device for the green environmental protection industry.

Wood Sawdust Briquette Press making machine
Its raw material can be stalk, straw , sawdust, coconut shell, rice hust, rice stalk, tree branch and so on. The final wood briquettes can be used as the fuel of boiler or the material to make charcoal.

80mm briquette making machine
No binder or noxious chemical need to use

Saving manpower wood charcoal briquette press machine
Wide spread and common raw materials;

sugarcane bagasse barbecue charcoal briquette machine
The charcoal making machine can used in processing the sawdust and rice husk and is the main production mechanism charcoal molding machine.

jute sticks bamboo bbq briquette wood charcoal making machine
Raw material —–Crusher——Dryer—–Making rods(Charcoal making machine)——Carbonization furnace———Finished product

Factory price charcoal briquette press automatic plant
Voltage: 380v/400v/415v
Weight: 700 KG
Features: Screw Press
Condition: New
Warranty: 1 Year
Product name: Charcoal Briquette Making Machine
Capacity: 500-600kg/h
Raw Material: Biomass Waste
Shape: Cylinder
Density of briquettes: 1.3 g/cm3

Square shape briquette for boiler
After the processing of drying, compressing under the high pressure and temperature, the biomass briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood.

Olive Pomace Waste Briquette Making Press Machine
This is sawdust briquette making machine.Machine adopt good quality carbon steel,the service life over 10 years.The material can be various biomass,like palm kernel,peanut shell,branch,logs,ect.

Compression Biomass Briquette Pellet Molding Machine
The ways of lubrication has improved from basting to immersing so that the oil can be used for many years as long as it is enough.

The machine has advantages of high density, small size, good flammability and can replace firewood and coal.

wood sawdust briquette press machine for wooden pallet
Material: sawdust, pini kay, wood log
Shapes of finished products: Hexagon, Squar with centre hole
Diameter of finished products: 50-80 mm
Capacity: 200-500kg/hr
Spare parts: Screw and mold pipe
After-sales Service Provided:
Video technical support, Online support, Field installation, commissioning and training, Field maintenance and repair service
Certification: CE Certificate

Heating ring For Biomass Charcoal Briquette Machine Equipment
Electric heating coil, high power, fast heating