Energy Saving Coconut Shell Carbonize production line

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably.

Biomass particles no more than 50mm and moisture content less than 30% can be directly carbonized into this horizontal carbonization furnace

However, there is a little limitation. That is if the diameter of the raw materials is too large, they need be crushed first. Here, the crusher machine will be used to crush them into small pieces. Of course, we sell various types of crusher machines as well.

The whole set of equipment consists of gasification system (liquefied gas gasification machine), purification system (spray tower, cyclone dust removal, water cooling, oil water separator, fine filter) and control system (control cabinet). The whole carbonization process is automated production, automated operation.

It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required

The low cost and strong practicability meet the initial entrepreneurs of small investment benefit good objective requirements.Carbonizer is sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, palm shell, bark carbon wood materials such as volume below 10 cm (granular) in the furnace under the condition of high temperature carbonization, the ideal equipment of anaerobic coking and coking rate is high.

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials.

The large volume of the main engine, high carbonization rate and strong production capacity. The carbonized raw materials are about 0.5-0.8 tons per hour

The entire production process does not produce harmful gases, does not pollute the environment, and is excellent in various carbonization furnaces.

.The continuous carbonization furnace is mainly used for the carbonization of the relatively fluffy biomass material such as rice husk.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

It has an advantages of zero pollution, zero emission, save labor, high capacity, energy-saving consumption, the high degree of automation and advanced technology. Which is suitable for large-scale production, with high carbonation rate, high carbon production rate, energy saving, environmental protection, high efficiency advantages.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, etc

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably. It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required, fully achieve the self-sufficient, improves the continuity and economy of the equipment, make full use of agricultural and forestry residues, make it treasure, and make more contributions for the greening of the environment.

Continuous biomass carbonization furnace for sale price is the sawdust, rice husk, peanut shell, straw, bark carbon wood materials such as plants (below 15 mm granular size) in the furnace under the condition of high temperature carbonization, anaerobic coking and coking of high rate of carbide powder series equipment.

Charcoal is a kind of renewable energy fuel that can be recycled from biomass waste. Its calorific value is higher than that of similar raw materials, and it burns better than ordinary coal.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, wood chips,date,olive waste,nut shell etc wood containing carbon materials.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

First, the biomass material is ignited in the gasifier.The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).

It is a kind equipment that can convert raw materials to carbon.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

Flue gas purification device: during the carbonized machine, the gasifier or char kiln woring will produce smoke separation, the flue gas purifier will separation the smokee, filtration, separating the wood vinegar, wood tar, water vapor swim ion contained in the flue gas .At the same time, to do harmless treatment of flue gas, a small local branch to substances (gas), respectively, reuse of environmental protection equipment;Is the smoke into combustible gases, lit recycle, to protect the environment, the effect of energy saving.

Environmental protection continuous type drum carbonization furnace is suitable for woodiness materials which containing carbon (volume below 15mm granular), such as coconut shell, apricot shell, hemp stalk, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, furfural residue, coffee grounds, palm shell, peanut shell, walnut shell. It is the better machine for dry distillation and anaerobic carbonization under high temperature and the carbonization rate is high.

Environmental protection continuous type drum carbonization furnace is suitable for woodiness materials which containing carbon (volume below 15mm granular), such as coconut shell, apricot shell, hemp stalk, sawdust, rice husk, etc

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

Ideal equipment for oxidation and high carbonization rate under high temperature conditions in the furnace .

Carbonation furnace used to carbonized raw material to charcoal

Biomass pyrolysis plant takes advantages of the biomass carbonization technology, using the high temperature to process sawdust, rice husk, straw, palm shell and other biomass waste into charcoal with rich carbon content. Apart from this, you can still get wood tar and vinegar.

The temperature of palm kernel shell carbonization can be as high as 700 degree, hence it has a high carbon content which is up to 92 percent.