Continuous Wood Chips Carbonization Furnace

The equipment is still using the principle of gasification and carbonization, and adopts advanced smoke-free environmentally friendly carbonization process.

According to this method of circulation, sufficient to achieve self-sufficient, then achieve the effect of energy-saving.

Continuous charcoal making machine can turn the raw material (sawdust ,rice hull ,weeds and shells ,straw ,) into charcoal . When the moisture content of raw material is more than 15%, raw materials need a dryer to dry. It is selling well for its easy operating, high capacity, good quality.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, etc

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.

The temperature of carbonization reaches 600 ℃ to 900 ℃ in the process. According to the characteristics of the material, the temperature can be adjusted according to the requirements.

.The continuous carbonization furnace is mainly used for the carbonization of the relatively fluffy biomass material such as rice husk.

Charcoal is a kind of renewable energy fuel that can be recycled from biomass waste. Its calorific value is higher than that of similar raw materials, and it burns better than ordinary coal.

The large volume of the main engine, high carbonization rate and strong production capacity. The carbonized raw materials are about 0.5-0.8 tons per hour

The low cost and strong practicability meet the initial entrepreneurs of small investment benefit good objective requirements.Carbonizer is sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, palm shell, bark carbon wood materials such as volume below 10 cm (granular) in the furnace under the condition of high temperature carbonization, the ideal equipment of anaerobic coking and coking rate is high.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, wood chips,date,olive waste,nut shell etc wood containing carbon materials.

Biomass particles no more than 50mm and moisture content less than 30% can be directly carbonized into this horizontal carbonization furnace

Generally speaking, almost all kinds of raw materials are suitable for palm kernel shell carbonization, such as bamboo charcoal, coconut shell, sawdust, wood, rice husk, tree bark, jute stick , palm shell, etc.

The temperature of palm kernel shell carbonization can be as high as 700 degree, hence it has a high carbon content which is up to 92 percent.

First, the biomass material is ignited in the gasifier.The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).

Different from the energy-saving and environmentally-friendly continuous carbonization machine, it has two significant advantages: First, the main machine has a large volume, high carbonization rate, and strong production capacity, and can be produce 0.3-0.8 tons of carbonized products per hour;

Ideal equipment for oxidation and high carbonization rate under high temperature conditions in the furnace .

Continuous biomass carbonization furnace for sale price is the sawdust, rice husk, peanut shell, straw, bark carbon wood materials such as plants (below 15 mm granular size) in the furnace under the condition of high temperature carbonization, anaerobic coking and coking of high rate of carbide powder series equipment.

It is a kind equipment that can convert raw materials to carbon.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required

It has two significant advantages: First, the host capacity, high carbonation rate, production capacity, per hour carbonized rice husk about 1 ton; Secondly, low cost, cost Low practicality, to meet the initial entrepreneurial investment benefits of small objective requirements. Carbonizing machine is the ideal equipment for dry distillation, low carbonization and high carbonization rate in the furnace under high temperature conditions such as wood chips, rice hulls, peanut shells, plant stalks, bark and other carbonaceous wood materials (volume below 15mm).

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably. It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required, fully achieve the self-sufficient, improves the continuity and economy of the equipment, make full use of agricultural and forestry residues, make it treasure, and make more contributions for the greening of the environment.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process:The whole set of equipment consists of gasification system (liquefied gas gasification machine), purification system (spray tower, cyclone dust removal, water cooling, oil water separator, fine filter) and control system (control cabinet). The whole carbonization process is automated production, automated operation.

Biomass pyrolysis plant takes advantages of the biomass carbonization technology, using the high temperature to process sawdust, rice husk, straw, palm shell and other biomass waste into charcoal with rich carbon content. Apart from this, you can still get wood tar and vinegar.

Sawdust continuous carbonization furnace is mainly used for relative puffy coking of biomass material

The entire production process does not produce harmful gases, does not pollute the environment, and is excellent in various carbonization furnaces.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials.

However, there is a little limitation. That is if the diameter of the raw materials is too large, they need be crushed first. Here, the crusher machine will be used to crush them into small pieces. Of course, we sell various types of crusher machines as well.