continuous sawdust carbonization furnace

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably.

The low cost and strong practicability meet the initial entrepreneurs of small investment benefit good objective requirements.Carbonizer is sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, palm shell, bark carbon wood materials such as volume below 10 cm (granular) in the furnace under the condition of high temperature carbonization, the ideal equipment of anaerobic coking and coking rate is high.

Carbonation furnace used to carbonized raw material to charcoal,The carbonizing machine is used to crush wood chips, rice husks, peanut husks, plant straws, etc

Ideal equipment for oxidation and high carbonization rate under high temperature conditions in the furnace .

Flue gas purification device: during the carbonized machine, the gasifier or char kiln woring will produce smoke separation, the flue gas purifier will separation the smokee, filtration, separating the wood vinegar, wood tar, water vapor swim ion contained in the flue gas .At the same time, to do harmless treatment of flue gas, a small local branch to substances (gas), respectively, reuse of environmental protection equipment;Is the smoke into combustible gases, lit recycle, to protect the environment, the effect of energy saving.

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.

Generally speaking, almost all kinds of raw materials are suitable for palm kernel shell carbonization, such as bamboo charcoal, coconut shell, sawdust, wood, rice husk, tree bark, jute stick , palm shell, etc.

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.

Part of the particulate matter in the exhaust gas is piled up and regularly cleaned to reduce the clogging of the particulate matter into the pipeline.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, etc

Rice husk continuous carbonization furnace is mainly used for relative puffy coking of biomass material, the device is still using the char gasification type principle

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably. It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required, fully achieve the self-sufficient, improves the continuity and economy of the equipment, make full use of agricultural and forestry residues, make it treasure, and make more contributions for the greening of the environment.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

The continuous carbonization furnace is the newest high production equipment in my company, at present,thecarbonization equipment on the market has small production, but the area is larger, therefore, after several experts of research and development,my company has designed horizontal high-throughput coking equipment,the production is high, high utilization rate of thermal efficiency,energy saving,environmental protection, smokeless, real implementation of smoke-free type production.

The large volume of the main engine, high carbonization rate and strong production capacity. The carbonized raw materials are about 0.5-0.8 tons per hour

However, there is a little limitation. That is if the diameter of the raw materials is too large, they need be crushed first. Here, the crusher machine will be used to crush them into small pieces. Of course, we sell various types of crusher machines as well.

It has an advantages of zero pollution, zero emission, save labor, high capacity, energy-saving consumption, the high degree of automation and advanced technology. Which is suitable for large-scale production, with high carbonation rate, high carbon production rate, energy saving, environmental protection, high efficiency advantages.

The whole set of equipment consists of gasification system (liquefied gas gasification machine), purification system (spray tower, cyclone dust removal, water cooling, oil water separator, fine filter) and control system (control cabinet). The whole carbonization process is automated production, automated operation.

Carbonation furnace used to carbonized raw material to charcoal

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

Continuous charcoal making machine can turn the raw material (sawdust ,rice hull ,weeds and shells ,straw ,) into charcoal . When the moisture content of raw material is more than 15%, raw materials need a dryer to dry. It is selling well for its easy operating, high capacity, good quality.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, wood chips,date,olive waste,nut shell etc wood containing carbon materials.

.The continuous carbonization furnace is mainly used for the carbonization of the relatively fluffy biomass material such as rice husk.

According to this method of circulation, sufficient to achieve self-sufficient, then achieve the effect of energy-saving.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

The entire production process does not produce harmful gases, does not pollute the environment, and is excellent in various carbonization furnaces.

Carbonation furnace is high ,need screw model conveyor ,feeding raw material like sawdust,palm shell,wood waste ,coconut shell or other biomass material.

It has two significant advantages: First, the host capacity, high carbonation rate, production capacity, per hour carbonized rice husk about 1 ton; Secondly, low cost, cost Low practicality, to meet the initial entrepreneurial investment benefits of small objective requirements. Carbonizing machine is the ideal equipment for dry distillation, low carbonization and high carbonization rate in the furnace under high temperature conditions such as wood chips, rice hulls, peanut shells, plant stalks, bark and other carbonaceous wood materials (volume below 15mm).

Different from the energy-saving and environmentally-friendly continuous carbonization machine, it has two significant advantages: First, the main machine has a large volume, high carbonization rate, and strong production capacity, and can be produce 0.3-0.8 tons of carbonized products per hour;