Continuous rotary sawdust biomass carbonization furnace

Generally speaking, almost all kinds of raw materials are suitable for palm kernel shell carbonization, such as bamboo charcoal, coconut shell, sawdust, wood, rice husk, tree bark, jute stick , palm shell, etc.

The entire production process does not produce harmful gases, does not pollute the environment, and is excellent in various carbonization furnaces.

Carbonation furnace used to carbonized raw material to charcoal,The carbonizing machine is used to crush wood chips, rice husks, peanut husks, plant straws, etc

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

Biomass particles no more than 50mm and moisture content less than 30% can be directly carbonized into this horizontal carbonization furnace

Generally speaking, almost all kinds of raw materials are suitable for palm kernel shell carbonization, such as bamboo charcoal, coconut shell, sawdust, wood, rice husk, tree bark, jute stick , palm shell, etc.

Part of the particulate matter in the exhaust gas is piled up and regularly cleaned to reduce the clogging of the particulate matter into the pipeline.

However, there is a little limitation. That is if the diameter of the raw materials is too large, they need be crushed first. Here, the crusher machine will be used to crush them into small pieces. Of course, we sell various types of crusher machines as well.

The low cost and strong practicability meet the initial entrepreneurs of small investment benefit good objective requirements.Carbonizer is sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, palm shell, bark carbon wood materials such as volume below 10 cm (granular) in the furnace under the condition of high temperature carbonization, the ideal equipment of anaerobic coking and coking rate is high.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

It has two significant advantages: First, the host capacity, high carbonation rate, production capacity, per hour carbonized rice husk about 1 ton; Secondly, low cost, cost Low practicality, to meet the initial entrepreneurial investment benefits of small objective requirements. Carbonizing machine is the ideal equipment for dry distillation, low carbonization and high carbonization rate in the furnace under high temperature conditions such as wood chips, rice hulls, peanut shells, plant stalks, bark and other carbonaceous wood materials (volume below 15mm).

First, the biomass material is ignited in the gasifier.The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).

Sawdust continuous carbonization furnace is mainly used for relative puffy coking of biomass material

Environmental protection continuous type carbonization furnace is suitable for woodiness materials which containing carbon (volume below 15mm granular), such as coconut shell, apricot shell, hemp stalk, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, furfural residue, coffee grounds, palm shell, peanut shell, walnut shell, etc.

Charcoal is a kind of renewable energy fuel that can be recycled from biomass waste. Its calorific value is higher than that of similar raw materials, and it burns better than ordinary coal.

Flue gas purification device: during the carbonized machine, the gasifier or char kiln woring will produce smoke separation, the flue gas purifier will separation the smokee, filtration, separating the wood vinegar, wood tar, water vapor swim ion contained in the flue gas .At the same time, to do harmless treatment of flue gas, a small local branch to substances (gas), respectively, reuse of environmental protection equipment;Is the smoke into combustible gases, lit recycle, to protect the environment, the effect of energy saving.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials.

The equipment is still using the principle of gasification and carbonization, and adopts advanced smoke-free environmentally friendly carbonization process.

Biomass pyrolysis plant takes advantages of the biomass carbonization technology, using the high temperature to process sawdust, rice husk, straw, palm shell and other biomass waste into charcoal with rich carbon content. Apart from this, you can still get wood tar and vinegar.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably.

Continuous biomass carbonization furnace for sale price is the sawdust, rice husk, peanut shell, straw, bark carbon wood materials such as plants (below 15 mm granular size) in the furnace under the condition of high temperature carbonization, anaerobic coking and coking of high rate of carbide powder series equipment.

The continuous carbonization furnace is the newest high production equipment in my company, at present,thecarbonization equipment on the market has small production, but the area is larger, therefore, after several experts of research and development,my company has designed horizontal high-throughput coking equipment,the production is high, high utilization rate of thermal efficiency,energy saving,environmental protection, smokeless, real implementation of smoke-free type production.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, etc

Rice husk and sawdust continuous carbonization furnace is a new type of environmentally friendly carbonization equipment.

Carbonation furnace is high ,need screw model conveyor ,feeding raw material like sawdust,palm shell,wood waste ,coconut shell or other biomass material.

The temperature of palm kernel shell carbonization can be as high as 700 degree, hence it has a high carbon content which is up to 92 percent.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably.

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably. It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required, fully achieve the self-sufficient, improves the continuity and economy of the equipment, make full use of agricultural and forestry residues, make it treasure, and make more contributions for the greening of the environment.