coffee husk olive continous charcoal making machine

First, the biomass material is ignited in the gasifier.The flue gas produced by burning after spraying, cooling, purification process, it produces the pure combustible gas (carbon monoxide, methane, ethane, etc.).

Biomass particles no more than 50mm and moisture content less than 30% can be directly carbonized into this horizontal carbonization furnace

Rice husk continuous carbonization furnace is mainly used for relative puffy coking of biomass material, the device is still using the char gasification type principle

Environmental protection continuous type carbonization furnace is suitable for woodiness materials which containing carbon (volume below 15mm granular), such as coconut shell, apricot shell, hemp stalk, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, furfural residue, coffee grounds, palm shell, peanut shell, walnut shell, etc.

However, there is a little limitation. That is if the diameter of the raw materials is too large, they need be crushed first. Here, the crusher machine will be used to crush them into small pieces. Of course, we sell various types of crusher machines as well.

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.

The advanced technology of recovering, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and produce smoke lead the carbonization process is adopted reasonably. It not only solves the problem that the ordinary carbonization furnace produce smoke lead the environmental pollution, and also solves the problem of heat required, fully achieve the self-sufficient, improves the continuity and economy of the equipment, make full use of agricultural and forestry residues, make it treasure, and make more contributions for the greening of the environment.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

Rice husk and sawdust continuous carbonization furnace is a new type of environmentally friendly carbonization equipment.

The equipment is still using the principle of gasification and carbonization, and adopts advanced smoke-free environmentally friendly carbonization process.

Flue gas purification device: during the carbonized machine, the gasifier or char kiln woring will produce smoke separation, the flue gas purifier will separation the smokee, filtration, separating the wood vinegar, wood tar, water vapor swim ion contained in the flue gas .At the same time, to do harmless treatment of flue gas, a small local branch to substances (gas), respectively, reuse of environmental protection equipment;Is the smoke into combustible gases, lit recycle, to protect the environment, the effect of energy saving.

The continuous carbonization furnace is mainly used for the carbonization of biomass materials. The equipment is still using the principle of gasification carbonization and adopts advanced smoke-free environmental carbonization process

The low cost and strong practicability meet the initial entrepreneurs of small investment benefit good objective requirements.Carbonizer is sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, palm shell, bark carbon wood materials such as volume below 10 cm (granular) in the furnace under the condition of high temperature carbonization, the ideal equipment of anaerobic coking and coking rate is high.

Can carbonized the Woodiness material containing carbon (below 15 mm granular size)such as:sawdust, rice husk, peanut shell, plant straw, bamboo, coconut, bark,palm shell, wood chips,date,olive waste,nut shell etc wood containing carbon materials.

Biomass pyrolysis plant takes advantages of the biomass carbonization technology, using the high temperature to process sawdust, rice husk, straw, palm shell and other biomass waste into charcoal with rich carbon content. Apart from this, you can still get wood tar and vinegar.

It is a kind equipment that can convert raw materials to carbon.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

The temperature of carbonization reaches 600 ℃ to 900 ℃ in the process. According to the characteristics of the material, the temperature can be adjusted according to the requirements.

Continuous carbonization furnace is to carbonize coconut shell, walnut shell, apricot shell, peach shell and other high hardness wood materials (particle size less than 15 mm) in the furnace for continuous high temperature, and finally into charcoal products.

The large volume of the main engine, high carbonization rate and strong production capacity. The carbonized raw materials are about 0.5-0.8 tons per hour

This machine is suitable for all kinds of forestry and agriculture powder particles. For example, sawdust, wood chip, bamboo, coconut shell, cherry shell, jujube, walnut shell, apricot shell shell shell, peanut shell, rice husk, cotton stalk, straw, the bean curd, etc.

Continuous charcoal making machine can turn the raw material (sawdust ,rice hull ,weeds and shells ,straw ,) into charcoal . When the moisture content of raw material is more than 15%, raw materials need a dryer to dry. It is selling well for its easy operating, high capacity, good quality.

Carbonation furnace used to carbonized raw material to charcoal,The carbonizing machine is used to crush wood chips, rice husks, peanut husks, plant straws, etc

Continuous biomass carbonization furnace for sale price is the sawdust, rice husk, peanut shell, straw, bark carbon wood materials such as plants (below 15 mm granular size) in the furnace under the condition of high temperature carbonization, anaerobic coking and coking of high rate of carbide powder series equipment.

Continuous biomass carbonization furnace for sale price is the sawdust, rice husk, peanut shell, straw, bark carbon wood materials such as plants (below 15 mm granular size) in the furnace under the condition of high temperature carbonization, anaerobic coking and coking of high rate of carbide powder series equipment.

Carbonation furnace used to carbonized raw material to charcoal

The continuous carbonization furnace is mainly used for the carbonization of biomass materials.

The continuous carbonization furnace is the newest high production equipment in my company, at present,thecarbonization equipment on the market has small production, but the area is larger, therefore, after several experts of research and development,my company has designed horizontal high-throughput coking equipment,the production is high, high utilization rate of thermal efficiency,energy saving,environmental protection, smokeless, real implementation of smoke-free type production.

Generally speaking, almost all kinds of raw materials are suitable for palm kernel shell carbonization, such as bamboo charcoal, coconut shell, sawdust, wood, rice husk, tree bark, jute stick , palm shell, etc.

Environmental protection continuous type drum carbonization furnace is suitable for woodiness materials which containing carbon (volume below 15mm granular), such as coconut shell, apricot shell, hemp stalk, sawdust, rice husk, etc

It adopts advanced smokeless environmental carbonization process and is a new type of equipment for rapid carbonization, high efficiency and energy saving.