charcoal making machine for nuts biomass briquette carbon fiber wood log sawdust

Introduction of Horizontal oven kiln briquette wood charcoal carbonization stove furnace:
Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the carbonizing furnace can be the material of activated carbon. thus it is very famous among many industries like charcoal making industry and boiler industry

How to make Bamboo charcoal
Wood Airflow Continuous Coconut Shell Charcoal Carbonization Stove Furnace Retort Kiln Machine. It can make the raw materials such as manmade wood briquettes,wood log,wood branch,bamboo,coconut shell etc. into charcoal directly.

This equipment organically combines the principle of gasification continuous carbonization and drum heating principle to realize a new process of smokeless carbonization. The main raw materials of continuous carbonization furnace are rice husk, straw, bagasse, palm shreds, bark and other plant wastes containing lignin. The carbonization efficiency is high, continuous production is possible, and smoke-free environmental protection is important for environmental protection

The new environmentally friendly horizontal airflow carbonization furnace adds a flue gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can be dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and Dryer use.

Rotary Drum Sawdust Carbonization Furnace kiln
New type of carbonization equipment, production higher than general furnace, fast speed, high carbon, simple operation With smoke purification device, can store tar, no leakage, long service life; Suitable for wood, logs, mechanism charcoal, nut shell, bamboo, etc, different shaps biomass raw material.

Carbonization furnace machine from bamboo
Outer stove includes heating room (for heating the stove), furnace body and heat-keeping layer (it is made of the heat insulating material, used for keep the heating)

Biochar making machine is the use of horizontal manufacturing process, biochar making machinee has a three-layer structure, and the middle of light insulation materials. It is possible to keep the temperature in the furnace at all times.

Coconut shell charcoal carbonization kiln
It adopts the advanced carbonized technology heat flow,carbonized rate increased significantly

wood lump charcoal carbonization furnace

This equipment organically combines the principle of gasification continuous carbonization and drum heating principle to realize a new process of smokeless carbonization. The main raw materials of continuous carbonization furnace are rice husk, straw, bagasse, palm shreds, bark and other plant wastes containing lignin. The carbonization efficiency is high, continuous production is possible, and smoke-free environmental protection is important for environmental protection Contribution.

charcoal making machine from sawdust factory
After the tremendous pressure of this machine, the rods have certain intensity,high density,stable performance,which makes the final product easy to transport and convenient to store.

The advantage of the Wood coconut shell charcoal making machine
1. Due to its design principle of horizontal type, reduce its carbonization time.
2. It can use different material as the fuel. Like waste wood, charcoal, natural gas, liquefied gas or coal gas.
3. Saving energy, it can reuse the smoke produced during the process of carbonization.
4. Continuous carbonization, it can produce 2-3 furnaces per day.

Bamboo charcoal carbonization furnace

Charcoal making machine from coffee husk
Briquetting: Put the dried materials into the briquette machine to make malaysia charcoal briquettes. This stick is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.

Horizontal style carbonization furnace adopts hot airflow carbonizing techonlogy, dramatically increased carbonization rate frome 85-99%. Furthermore, the process evenly carbonizing the material, which contribute to the top quality production. It is easy and safe to operate, as well as it has a low energy cost.

coconut shell charcoal making machine
This bio-fuel briquette is 40-90mm in diameter,occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.The bio-fuel carbon maintains the cleanliness and hygiene,and is suitable for family heating and barbecuing.

Building template charcoal making machine
What materials do you use to dry ?
You can use almost all the biomass materials.

High Temperature Continuous Wood Carbonization Furnace.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

Bamboo Fresh Wood Log Charcoal Carbonization Furnace
Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the carbonizing furnace can be the material of activated carbon. thus it is very famous among many industries like charcoal making industry and boiler industry!

charcoal carbonization furnace charcoal making machine
Raw material of carbonization furnace
lignin-containing material: Wood, Bamboo, Coffee husk, Rice straw, Coconut shell, Rice husk, Palm shell, Nuts shell ect.

wood carbonizer stove
How to make charcoal from sawdust?
1. Wood crusher: A crusher will help you to reduce the size of your raw material to less than 5 mm.
2. Dryer: For small capacity drying, you can choose the air flow dryer with small investment. If your capacity is bigger, a rotary dryer will be a better choice.
3. Wood briquette machine: Press raw material into wood briquettes.
4. Charcoal furnace: After carbonization, wood sawdust briquettes become smokeless charcoal.
5. Other accessories: Conveyor, material distributor, etc.

charcoal making machine/wood carbonizer stove
1. Three layers structure of the furnace body. The inner layer is high heat transfer and wear-resistance steel for increasing the carbonizing temperature. The middle layer is the asbestos for insulation. The outer layer is painted steel.
2. Various heating methods. The heating source can be firewood, coal, natural gas, liquefied gas, burner, electric, etc.

1. Due to its design principle with two layers, one is the cooling layer, another is the heat preservation layer, so can reduce its carbonization time.
2. It can use different material as heating source. Such as the Firewood/coal gas/ natural gas/liquefied gas/Combustible gas(produced during the carbonized process).
3. Using anaerobic coking and combustible gas recycling technology.
4. Every step from raw materials to production process will be monitored by the engineer, equipment debugging the final before delivery. With engineer and boss signature before shipment ensure the reliability of the technology, has the practicability of products.
5. Smoke purification treatment : Water and activated carbon filtration purification gas.

Environmental protection .because the stick in the carbonization process will produce a lot of light yellow combustible gas.These gases through the carbonization furnace with there own pipes can make combustible gas diversion to the charring furnace combustion zone to the second fire heating. More environmentally friendly and saving fuel.

Horizontal Carbonizing Furnace to end charcoal cooling time is shorter.
Horizontal Carbonizing Furnace Supporting a track and kiln car, use more convenient,reduce worker labor intensity.

Coffee waste charcoal press machine
Briquetting is a process during which raw materials are compressed under high pressure and high temperature. After the processing of drying and pressing, the briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood.

At present, there are three types of carbonization furnaces, common type (can only be used to produce charcoal, not to collect gas); wood carbonization equipment (used to carbonize branches, wood blocks, coconut shell blocks, scrap pieces in furniture factories, etc.) This equipment can be configured The gas recovered by the gasification furnace device can be turned into fuel gas for the carbonization furnace’s own use or other); the new horizontal environmentally friendly carbonization furnace has the effect of one machine and two purposes, and the materials can also be directly carbonized, or can be carbonized after rods.

How to make charcoal from straw
What is the max moisture of your material ?
Our machine can dry biomass materials between 60% and 70%.

coconut hull waste charcoal making machine
briquette machine is the process of making waste materials into solid fuel. The objects are used for burning purposes.

The charcoal carbonization machine adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.And the operation is very convenient, good safety, high production efficiency, can save a lot of energy, good environmental protection performance. Shunt can also dry burning boiler flue gas and so on. Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.