Bio coconut shell charocal briquette

coal dust briquette making machine
The spare parts screw of teh charcoal extruder machine

Charcoal Briquettes Pressing Machinery
wood sawdust waste chips briquette charcoal making machine is to carbonize the raw material crush the wood firstly, next to crush the material, and to mix and stir with the wheel mill. Then put the materials into the energy saving shisha coal and charcoal extruder machine to get the charcoal rods.

Coal Powder Briquette Sticks Machine
Raw material:

Raw material is wide range, such as charcoal dust, charcoal powder, coal powder, coking coal powder and so on.

charcoal extruding machine coconut shell charcoal powder extruder forming machine
This Coal Briquette Extruder uses the principle of spiral extrusion, compressed the prepared

pulverized coal into a certain intensity of cylinder or plum flower shaped through extruding.

widely used to making coal powder into briquettes for boiler, furnace, home heating, etc.

screw charcoal extruder

Charcoal Screw Press Briquette Machine
This product use screw extrusion principle, will be prepared coal powder compressed into a cylinder of a certain intensity or plum blossom shape（Not only the cylindrical or plum flower shape, our mould can be replaced）,It can make full use of pulverized coal, reduce the fuel cost

charcoal extruding press machine
Coal bar machine is mianly use to making man-made charcoal from coal powder.

2) The motor transmits power to transmission through the V-belt.

3) The transmission output shaft transmits power to propeller through the floating coupling, and the thruster of propeller

push forward coal through forming die to produce the ideal high-pressure coal-stick.

Small capacity charcoal rods forming machine
Any types of charcoal can be used for charcoal bricket making machine to make shisha charcoal, Such as wood charcoal,coconut shell charcoal,bamboo charcoal, also wood,tree branches,coconut shell and etc.We have different production process to deat with the material,then to produce shisha.

This coconut charcoal extruder briquette machine can be used to extrude charcoal stick, biomass stick of different diameters (diameter range: 15-65mm) in cylinder or square shape without hole through different moulds from charcoal dust or charcoal powder.

CE Coal Pellet Making Extruder
The cow dung briquettes

Sticks Charcoal Making Machine

charcoal briquette press machine
The compression process of biomass under the high temperature and high pressure of the carbonization furnace has no pollution to the environment during the combustion process.

2t per hour charcoal stick machine
charcoal stick briquette making machine

Advantage Of Coal Rod Making Machine
1. It absorbs the advanced technique at home and abroad

barbecue charcoal briquettes machine
The shape of final briquettes can be adjusted. It is up to the shape of mould. Customer can choose the mould

New Type Charcoal Coal Briquette Extruder Equipment
1.The material is transferred to the conditioner by a screw feeder, then the conditioner can make different materials fully mixed.
2.The conditioner plays a key role in softening raw materials by utilizing water or steam.
3.After softening, the raw material is sent by a feeder to the pelletizing chamber. By spinning rollers in the chamber force the material through the holes of the die, thus pellets are formed.
4.After pelletizing, the length of the pellet can be cut according to different user’s request.

biomass charcoal forming making machine
It mainly uses carbonaceous wood materials such as sawdust, sawdust, rice husk, peanut shell and plant straw, and passes through high temperature and high pressure process without any binder, extruded into a solid hollow bar

Peanut shell leaves papers charcoal briquette making machine
Peanut shell leaves papers to charcoal briquette making machine to carbonize the raw material crush the wood firstly, next to crush the material, and to mix and stir with the wheel mill. Then put the materials into the energy saving shisha coal and charcoal extruder machineto get the charcoal rods

Sawdust Coal briquette machine

stick forming machine

Coconut Shell Charcoal Briquette Machine

Charcoal Coal Briquette Extruder Equipment
1.The material is transferred to the conditioner by a screw feeder, then the conditioner can make different materials fully mixed.
2.The conditioner plays a key role in softening raw materials by utilizing water or steam.
3.After softening, the raw material is sent by a feeder to the pelletizing chamber. By spinning rollers in the chamber force the material through the holes of the die, thus pellets are formed.
4.After pelletizing, the length of the pellet can be cut according to different user’s request.

Coal Dust Briquette Extruder Machine
Application of Coal Dust Briquette Extruder Machine

1. This charcoal dust extruder is mostly used to make coal and charcoal powder into sticks. As the first step to make silver shisha(hookah) charcoal.
2. The shape of the sticks can be designed depends on customers’ requirements.
3. The product made by this machine is no pollution and smoke. It is the most suitable machine for charcoal stick making.

straw charcoal briquette machine

Hydraulic charcoal Coal dust powder briquette machines
Charcoal extruder machine, which using the principle of screw extrusion to compress the coal powder into a predeter mined shape with a certain intensity.after the coal powder poured into machine chamber,it bears tremendous pressure.With the help of all kinds of shaped molds,it will be shaped into certain shapes.Now, our factory has developed and researched double-head and four-head coal extruder.It not only improve production capacity largely, but also give the buyers more choices.This kind machine not only can accept coal powder, but also charcoal powder coconut shell powder and so on

Coal Charcoal Extruder Machine produce shisha or bbq
Coal rods machine is made of powdered coal blocks of different shapes strip machines.
Its working principle is:the power to the motor through V-belt transmission, the transmission output shaft to pass through the floating propeller shaft coupling the power,propulsion shaft coal material by pushing ahead with its molding diesoon,will produce the ideal high pressure coal rods.

Briquette Extruder Press

Professional Manufacturing sales shisha charcoal machine
.After changing the mold, the material can be pressed into sheet-like (Ф15-Ф50mm) square, rectangular, ring, diamond, triangle, cylindrical and other geometric products. It can also emboss words, trademarks, patterns and various special shapes.

waste chips briquette charcoal making machine
The machine now has improved adding one bearings into the traditional ones, which makes the machine more stable and durable.

Charcoal briquette making plant
Working Flow:
*1 Binder mixer: It is using for dissolving and thicking binder.
*2 Crusher and mixer: It is a machine with the function of crushing and mixing together, crushing the raw material below 5mm, and mixing them uniformly. The moisture need controlled between
25%-30%.
*3 Coal briquette machine: It presses coal powder, charcoal powder, or other powders.
*4 Drying room: We have mesh belt dryer and Air energy drying room . We will suggest suitable dryer according to your raw machine, shape and size