Bamboo coconut lump charcoal making machine

Hot sell Bbq charcoal briquettes biomass wood charcoal machine
You could also used sawdust briquette machine and charcoal making machine to produce charcoal briquette.

Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove!

Bamboo charcoal carbonization furnace

wood lump charcoal carbonization furnace

Hot sale horizontal coconut shell charcoal making furnace

High Temperature Wood Carbonization Furnace.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood branches, wood, coconut shells, plants,straw,bamboo etc.).

Horizontal style carbonization furnace adopts hot airflow carbonizing techonlogy, dramatically increased carbonization rate frome 85-99%. Furthermore, the process evenly carbonizing the material, which contribute to the top quality production. It is easy and safe to operate, as well as it has a low energy cost.

biomass sawdust carbonization furnace charcoal making machine
This wood carbonization stove is an efficient stove can change wood log, wood briquette, coconut shell and bamboo Palm shells etc directly into final charcoal,can working without electricity.

Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.

Wood branches briquette making machine plant
The material size must be less 20mm.If material too big,we will recommend you crusher according to your requirement.Besides the moisture of material should be 10-20%.Too wet or too dry will cause bad forming effect.

Sawdust briquette for boiler heating
Can we use the machine directly ?
Yes, start the machine, when temperature reach 320 degree, put your materials into hopper, you will get fuel briquette

Biochar making machine is the use of horizontal manufacturing process, biochar making machinee has a three-layer structure, and the middle of light insulation materials. It is possible to keep the temperature in the furnace at all times.

The smokeless charcoal stove is special used for wood log, jute stick and other long rod-type biomass characteristics, adopts horizontal structure, cart entry and exit raw material and the advanced hot gas dry carbonization process technology, using a unique carbonization flue gas (volatile hydrogen material and tar, etc.)

best selling wood sawdust briquette machine
Voltage 380v,450v
Capacity 260-350kg/h
Motor power 18.5kw
Speed 40rpm
Raw material Peanut shells, bagasse,rice husk,sawdust,
Usage press the powder into briquettes
Moisture of raw material 8%-12%
Working type Screw Pushing
Package Wooden case

High Temperature Continuous Wood Carbonization Furnace.Then apply it in life .Raw materials can be all kinds of Biomass wastes (such as wood chips, wood, coconut shells, rice husks, plants, sludge, peach kernels, sawdust, wood chips, wood,rice husk,tree bark,etc.).

Building template charcoal making machine
What materials do you use to dry ?
You can use almost all the biomass materials.

Coconut Shell Biochar kiln Charcoal Making Machine
horizontal charcoal furnace is a new kind of air flow type carbonization stove, which can also be called charcoal kiln, charcoal making machine, charcoal stove. It is used to make charcoal from wood and all kinds of biomass.

This equipment organically combines the principle of gasification continuous carbonization and drum heating principle to realize a new process of smokeless carbonization. The main raw materials of continuous carbonization furnace are rice husk, straw, bagasse, palm shreds, bark and other plant wastes containing lignin. The carbonization efficiency is high, continuous production is possible, and smoke-free environmental protection is important for environmental protection

Introduction of Horizontal oven kiln briquette wood charcoal carbonization stove furnace:
Charcoal carbonizing furnace is a kind of new air flow type carbonization stove, can also be called as charcoal carbonization stove. It is used to make charcoal from wood and all kinds of biomass. It adopts new advanced hot air carbonizing technology, greatly improves the carbonization rate to 99%, compared with the carbonization rate 80% of traditional carbonization stove! Its charcoal making time is short .This kind stove is safe and easy to operate,the charcoal made from the carbonizing furnace can be the material of activated carbon. thus it is very famous among many industries like charcoal making industry and boiler industry

Environmental protection .because the stick in the carbonization process will produce a lot of light yellow combustible gas.These gases through the carbonization furnace with there own pipes can make combustible gas diversion to the charring furnace combustion zone to the second fire heating. More environmentally friendly and saving fuel.

Rotary Drum Sawdust Carbonization Furnace kiln
New type of carbonization equipment, production higher than general furnace, fast speed, high carbon, simple operation With smoke purification device, can store tar, no leakage, long service life; Suitable for wood, logs, mechanism charcoal, nut shell, bamboo, etc, different shaps biomass raw material.

charcoal carbonization stove furnace charcoal making machine

Coffee waste charcoal press machine
Briquetting is a process during which raw materials are compressed under high pressure and high temperature. After the processing of drying and pressing, the briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood.

Firewood briquette charcoal machine for BBQ

How to make charcoal from coconut shell
Briquette are made by grinding biomass and sawdust into a homogenous pulp and forming this into a briquette under very high pressure.High pressure & pressing releases one of the natural components of wood-lignin which has the property of becoming liquid at high pressure(temperature) and,as it subsequently cools,it binds the wood together in its new form briquettes.

The charcoal carbonization machine adopts the advanced carbonized technology heat flow, carbonized rate increased significantly, The carbonized rate is 99%.And the operation is very convenient, good safety, high production efficiency, can save a lot of energy, good environmental protection performance. Shunt can also dry burning boiler flue gas and so on. Truly the charcoal, gas and oil range of equipment is currently the world’s most advanced carbonization furnace.

coconut shell carbonization furnace
Easy to operate, safety, environmental protection and high production efficiency. It is the main ideal equipment of the charcoal production line.

Palm husk charcoal making machine
♦ square, round, hexagonal, pentagon(with/without edge)
♦ Hollow
♦ Stick shape
♦ Diameter: 50-80mm
♦ Inside diameter: 15-20mm
♦ Length: 20-50cm
♦ Weight of one briquette: 1kg
♦ Specific gravity: 1200—1300kg/m3
♦ Calorific value:4000-4800kcal/kg

Wood logs charcoal briquette press machine
Carbonization furnace for biomass charcoal can greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization.

biochar kiln carbonization stove to make coconut shell wood log charcoal
Apply for many kinds of biomass raw materials, such as wood, wood log, tree branch, wood stick, wood waste, wood briquette, coconut shell, bamboo, olive husk, palm kernel shell, cashew nut shell, etc.