2t per hour charcoal stick machine

Charcoal Briquettes Pressing Machinery
wood sawdust waste chips briquette charcoal making machine is to carbonize the raw material crush the wood firstly, next to crush the material, and to mix and stir with the wheel mill. Then put the materials into the energy saving shisha coal and charcoal extruder machine to get the charcoal rods.

charcoal bar making machine
Principle of Coal and charcoal briquette extruder machine

Coal bar machine is the core equipment of charcoal machinery. It can press bamboo, wood, shells, straw (besides

stalk and wheat straw) and other waste powdery materials that the moisture less than 12% into various shapes solid briquettes

with center hole by high temperature and high pressure, and no need any binders.

charocal dust briquette machine
can be customized the special shaping mould

Hot sell charcoal extruder briquette machine
Charcoal briquette extruder making machine is mainly used to use the screw extrusion principle to process charcoal or coal powder mixed with a certain proportion of liquid binder into different shapes and size of briquettes.

coal bar forming equipment
Coal bar extruder (also known as coal extruder machine) is a coal bar forming equipment which compresses the prepared pulverized coal into a predetermined shape with certain strength by using the principle of screw extrusion.

Briquette Wood Charcoal Making Machine
This charcoal briquette machine mainly is using the rural corn stover, corn cobs, branches, leaves, sawdust as raw material to produce charcoal.
The charcoal machine can process all kinds of straw and branch. The wood charcoal making machine can produce the high efficiency charcoal.

Briquette Extruder Press

Charcoal briquette extruder macking machine
It can press cylinder shape/hexagon shape/cubic shape and other shapes by changing the mold.

imple introduction of the coal charcoal briquette making machine:
BBQ Charcoal And Coal Powder Briquette Machine
This coal charcoal briquette making machine can be used to extrude charcoal stick, charcoal bar, biomass stick of different diameters in cylinder or square shape without hole through different moulds from charcoal dust or charcoal powder.

Charcoal Screw Press Briquette Machine
This product use screw extrusion principle, will be prepared coal powder compressed into a cylinder of a certain intensity or plum blossom shape（Not only the cylindrical or plum flower shape, our mould can be replaced）,It can make full use of pulverized coal, reduce the fuel cost

Coal Charcoal Extruder Machine produce shisha or bbq
Coal rods machine is made of powdered coal blocks of different shapes strip machines.
Its working principle is:the power to the motor through V-belt transmission, the transmission output shaft to pass through the floating propeller shaft coupling the power,propulsion shaft coal material by pushing ahead with its molding diesoon,will produce the ideal high pressure coal rods.

Charcoal or coal powder need mix with Starch or other binders,it helps improve the heat value and bind them together.It has high economic benefits. In addition, the equipment is small in size,recycle the waste charcoal powder and form new beautiful briquette.

Sticks Charcoal Making Machine

Professional Manufacturing sales shisha charcoal machine
.After changing the mold, the material can be pressed into sheet-like (Ф15-Ф50mm) square, rectangular, ring, diamond, triangle, cylindrical and other geometric products. It can also emboss words, trademarks, patterns and various special shapes.

BBQ Sawdust Bio Charcoal Briquette Machine
Coal stick machine is one of the coal powder shaping machines, which using the principle of screw extrusion to compress the coal powder into a predetermined shape with a certain intensity. After the coal powder is poured into machine chamber with tremendous pressure. it will be shaped into certain shapes through various moulds.

Coal Pellet Making Extruder
This charcoal extruder making machine feed the ratio and retting coal powder mixture into a nitrogentreated barrel by the extrusion of principle, which will compress into section for round or plum flower form or other shape. The fianl coal rods have a certain mechanical strength by
formed in this equipments.

Charcoal briquette making plant
Working Flow:
*1 Binder mixer: It is using for dissolving and thicking binder.
*2 Crusher and mixer: It is a machine with the function of crushing and mixing together, crushing the raw material below 5mm, and mixing them uniformly. The moisture need controlled between
25%-30%.
*3 Coal briquette machine: It presses coal powder, charcoal powder, or other powders.
*4 Drying room: We have mesh belt dryer and Air energy drying room . We will suggest suitable dryer according to your raw machine, shape and size

Charcoal Coal Briquette Extruder Equipment
1.The material is transferred to the conditioner by a screw feeder, then the conditioner can make different materials fully mixed.
2.The conditioner plays a key role in softening raw materials by utilizing water or steam.
3.After softening, the raw material is sent by a feeder to the pelletizing chamber. By spinning rollers in the chamber force the material through the holes of the die, thus pellets are formed.
4.After pelletizing, the length of the pellet can be cut according to different user’s request.

Charcoal stick extrusion coal bar briquette machine bbq
Features of charcoal sticks making machine
1：large feed screw lead,feed fast forward helix lead a small,provincial power.
2：shaft seat and the cylinder rigid connections,high concentricity,anti-thrust, the machine stability.
3：part adopts fault structure should be sealed,dirt missed by a fault at.
4：V-belt drive,smooth operation,low noise,while its role overload.
5：connected with the cylinder head ring structure,bolt structure,according to the user needs to elect their own set.

sawdust charcoal briquette extruder
The Biomass Extrude Machine is the main molding equipment in sawdust production line

Extruder Charcoal Stick Maker

straw charcoal briquette machine

wood charcoal briquette press machine
The raw materials must meet the requirements: moisture 8%-12%, size 3-5mm

charcoal briquette press machine

Best-selling Charcoal dust briquette machine
Charcoal extruder machine, which using the principle of screw extrusion to compress the coal powder into a predeter mined shape with a certain intensity.

Coconut Shell charcoal briquette machine
. The Coal Briquette Machine is the special equipment for processing the charcoal powder or coal dust into different shape, different size of charcoal briquettes with the different moulds.

2. It can make the briquettes with Cylindrical, cylindrical hexagon, six prismatic, etc
3. It has the features of novel design, easy operation and stable performacahrnce.

Jute Sticks Charcoal Making Machine
can make the shisha cubic charcoal

Manufacturing sales shisha charcoal machine
The tablet press produced by Chengjinlai Machinery can be used to press water pipe charcoal tablets, carbon powder tablets, animal salt and other materials.

Coconut Charcoal Briquette Machine

charcoal stick extruder machine is mainly used to use the screw extrusion principle to process charcoal or coal powder mixed with a certain proportion of liquid binder into different shapes and size of briquettes.
It can press cylinder shape/hexagon shape/cubic shape and other shapes by changing the mold